Call a Specialist Today! 800-886-5369

Datacom Systems SS-2212-10G
10 - 10 Gigabit Taps, 10 Gigabit Monitoring for 2 Analysis Tools

ss2212-10g

Datacom Systems Products
Datacom Systems Network Taps
10G Link Network Tap
(10 Taps, 2 Non-Aggregated Monitoring Ports). SR* multimode (50 or 62.5 micron)(*specify tap diameter when ordering)
#SS-2212-SR-10G
Contact Us for Pricing!
10G Link Network Tap
(10 Taps, 2 Non-Aggregated Monitoring Ports). LR single mode (9 micron). (*specify tap diameter when ordering)
#SS-2212-LR-10G
Contact Us for Pricing!

Overview:

The SINGLEstream SS-2212-10G Link Aggregation Tap is passivley inserted inline and can collect traffic from ten network links and direct two links full duplex traffic toward two outputs. Non-powered, built in fiber taps mean that traffic is safely collected with less that 10ns of latency added to the network. With 2 monitoring ports, you can have 2 copies of full duplex, line rate data streams. The SS-2212-10G is best used where a large number of 10G links need to be troubleshot quickly with one or two analytic devices.

  • 100% Network Uptime - fiber tap is completely passive and won't disrupt the network even if power is lost to the tap
  • Decreased reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription and configuration errors
  • After installation, deploy tools right away without impacting your production network
  • Easily share test access points without maintenance windows
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • Keep your monitoring tool plugged in while troubleshooting the same link

Features and Benefits:

  • Monitoring Ports can be directed to any tapped channel
  • Channel Naming
  • Telnet, SSH
  • Managed User Privileges
  • Dual Redundant Power Supplies are hot swappable and load balanced to ensure monitoring uptime

10 Gigabit Access

The SS-2212-10G In-Line fiber network tap allows you to directa copy of traffic from any of the ten tapped network links and send the copy to one or both monitoring tools. Passive and non-intrusive visibility is available for two 10G monitoring tools

Totally Passive and Power Fault Tolerant

Integrated fiber taps are completely passive devices and are not a point of failure on the network. Even if power is lost to the tap, the network traffic will not be affected. If one side of the link fails for any reason, the device on the other side of the link will recognize this outage immediately, so routers and switches can engage redundant protocols and failover systems.

Zero Latency

Fiber taps allow traffic to flow between network devices through an optical to optical interface, which resolves any latency concerns between network devices.

Regeneration

One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Interconnect up to 8 devices

Provide analyzer access for up to 80 10G links by interconnecting up to 8 SS-2212-10G devices. When interconnected, they present a single logical unit where one tool can be easily directed to receive a copy of traffic from any of up to 80 network links. A second tool can receive traffic from the same link or any of the other 80 links that are tapped.

Graphic Display and Command Line Interface

The front panel graphic display allows users to determine where the copy of network link traffic is sent. Since the SINGLEstream™ can be interconnected, up to 8 deep, the address of each device, is available on the front panel. Power levels (in dB) on each link are available to determine if other network changes have occurred such as bad patch cords.

Reliable and Easy to Use

The SINGLEstream™ Network Tap is simple to deploy, and every unit comes with dual redundant hot-swappable power supplies to ensure monitoring uptime.

Diagram:

ss-2212-10g

Technical Specifications:

Model SS-2212-10G
Ports
  • Network: Ten (10) SR or LR Network Taps with Dual LC Connectors
  • Monitoring: Two (2) SR or LR Monitoring Ports
  • Management: RJ45 @ 100 Mbps Full-Duplex
  • Serial (rear): DB9F DB9M
Power Requirements
  • Hot Swappable Dual Redundant Power Supplies(AC or DC)
  • BTU/H: 682 typical
  • AC: 100-240VAC, 50-60 Hz, 4.0A-2.0A
  • DC: 40.5-72.0VDC, 10.0-5.0A
Dimensions (H x W x D) 1.72 x 19.00 x 26.5 in (4.37 x 48.26 x 67.31 cm)
Weight 18.5 lbs (8.23 kgs)
Operating Temperature 32º to 104ºF (0° to 40° C)
Storage Temperature -22º to 149ºF (-30° to 65° C)
Humidity 5 to 90% non-condensing
Certifications
  • CE
  • Fully RoHS Compliant
Warranty One (1) Year Hardware Warranty included Advanced Replacement-Next Day, 3rd Business Day options available.

Documentation:

Download the Datacom Systems SS-2212-10G Datasheet (.PDF)