Datacom Systems T1/E1-PT
T1/E1 Passive Tap
Click here to jump to more pricing!
Overview:
The T1/E1 Passive Network Tap is a single port device that provides easy, 24 x 7 access to a T1/E1 segment. The T1/E1 Passive Tap’s design is non-powered, so it will ensure that network performance and integrity will not be affected by power loss. Use with portable or distributed T1 analyzers, intrusion detection devices, probes, and monitoring devices.
- Permanent tapped access eliminates the need for network connectors to be disconnected and connected each time a network segment needs to be monitored
- Non-powered passive tap design for total fault tolerance - network will never be interrupted due to power loss or network tap failure
- T1/E1 network taps provide In-Line access to critical T1/E1 links for monitoring of WAN traffic
- T1/E1 taps are Ideal for Security and Monitoring applications
- View ALL seven layers of network traffic
- Improve the ROI of your Network Tools
- Use an optional rack mount package to mount 3 units (at 1RU)
Guide:
What's in the Package
T1/E1-PT Tap
Introduction
The T1/E1-PT is a directional single-port full-duplex device that provides an easy method to rapidly and effectively deploy your analysis tools to monitor T1/E1 traffic between your network devices. Typically the tap is installed on a critical T1/E1 link in the network where monitoring and analysis capabilities are important.
T1/E1-PT features and benefits:
- T1/E1 compatible
- Non-intrusive monitoring device
- Standard RJ45 connectors
T1/E1-PT Specifications
| Feature | Specification |
|---|---|
| Channel | One directional T1/E1 |
| Cable Type | CAT 5E |
Port Connectivity
|
|
| Distance Limit | 90 meter maximum length between network end-points. Tap typically 1 meter. |
| Power Requirements | none |
| Operating Temperature | 0O to 40O C (32O to 104O F) |
| Storage Temperature | -30O to 65O C (-22O to 149O F) |
| Humidity | Less than 95O C non-condensing |
| Dimensions | 1.10" (H) x 5.75" (W) x 5.75" (D) (includes rack mount bracket) 28 mm (H) x 146 mm (W) x 146 mm (D) |
| Weight | Unit - 12 ounces; Shipping - 2 pounds |
Installing a T1/E1-PT in an Equipment Rack
Prior to putting the T1/E1-PT in a standard 19-inch rack you may want to contact your T1/E1-PT representative to discuss a rack mount option or ...
T1/E1-PT with thumbscrew bracket to mount in RMC-3 rack mount
Three devices shown mounted in rack mount option
Functional Operation
Refer to FIGURE 1 for a diagram of the functional operation of the T1/E1-PT.
FIGURE 1 — T1/E1-PT Functional Diagram
Connecting a T1/E1-PT to the the Network
FIGURE 2 — T1/E1-PT Simple Connectivity Diagram
To connect the T1/E1-PT into the network, refer to FIGURE 2 and follow these steps:
IMPORTANT: The maximum length of 90 meters must not be exceeded between end-points.
- Connect one of the network device cables to the T1/E1-PT RJ45 port LINE connector.
- Connect the other network device cable to the T1/E1-PT RJ45 port NETWORK connector.
- Connect a tap cable from the T1/E1-PT RJ45 port TAP connector into the port of the Network Analysis Tool interface card.
Specifications:
| T1/E1-PT | |
|---|---|
| Network Connections | T1/E1 Tap (Line and Network Port) (RJ45) |
| Monitoring Connection | TAP Port (RJ45) |
| Power | Non-powered |
| Dimensions (H x W x D) | 1.10 X 5.75 X 5.75 in 28 X 146 X 146 mm |
| Weight | 12 oz. .34 kilograms |
| Environmental | Operating Temperature: 32º to 104ºF (0º to 40ºC) Storage Temperature: -22º to 149ºF (-30º to 65ºC) Humidity: Less than 95% non-condensing |
| Certifications | EC Directive of Electromagnetic Compatibility 89/336/EEC and EC Low Voltage Directive 73/23/EEC |
| Warranty | Two (2) Year Standard Warranty |
| Ordering Information | T1/E1-PT T1/E1 Passive Tap |
| Optional Rack Mount | RMC-3 |
Documentation:
Download the Datacom Systems T1/E1-PT Datasheet (.PDF)
- Pricing and product availability subject to change without notice.